SMO pick-up

SMO pick-up

Mulcher with pick-up device 50-100 HP

  • Flail mulcher for orchards and vignards with pick-up rotors to gather and mulch accumulated prunings.
  • Modular lower pick-up kit for material feed with grid and with pick-up rotor
  • Mulches grass, prunings and wood of 3 cm [1.2”] Ø and occasionally up to 7 cm [2.8”] Ø
Trinciatrici con dispositivo pick-up
Trituradoras con dispositivo pick-up
Trituradoras con dispositivo pick-up
Trituradoras con dispositivo pick-up
Trituradoras con dispositivo pick-up
Trituradoras con dispositivo pick-up
Trituradoras con dispositivo pick-up
Trituradoras con dispositivo pick-up
broyeurs forts avec dispositif pick-up
Trituradoras con dispositivo pick-up
Trinciatrici con dispositivo pick-up
Mulchgerät mit Pick-up-Vorrichtung

You don‘t need to remove prunings anymore. When you use a SEPPI pick-up mulchers it will be mulched finely, through a fine mulching grid. This results in a fast biodegradation, within one season.
The SMO pick-up is suitable for olive cultivations, orchards and vineyards. The machine is fast, it collects and mulches finely 100% of the prunings in one single pass.
Prunings are lifted from the ground and processed through a screen; therefore no contact between the hammers and ground.

SMO pick-up casing is very resistent, made of high-tensile steel. Counterknives inside the casing will give a perfect result when mulching.

Modular lower pick up kit for material feed with grid inclusive rotor (standard). Pressure gauge for easy control of the pick-up rotor.

Take off kit to convert back to standard mulcher.

Available working width: 125, 150, 175, 200 cm [49", 59", 69", 79"].

SMO pick-up - STANDARD VERSION
  • Mulches wood of 7 cm [2.8”] Ø
  • Working speed 3-5 km/h
  • Chassis made of high tensile steel S420
  • ISO 3-point linkage central fixed cat. 1 & 2 (rear or front mounted or reverse drive for pushed machines)
  • Gearbox 540 rpm with automatic inverter and double freewheel for reversible tractors
  • Input shaft 1 3/8” Z=6
  • Belts: 4
  • Modular lower pick-up kit BIONIC FEED for material feed with grid and with pick-up rotor
  • Pressure gauge and flow control Pick-up rotor driven by tractor hydraulics
  • Required hydr. flow: 20 l/min [5,3 gpm]
  • Triple helical rotor with SMO flails
  • Rotor wall thickness: 12,5 mm
  • 2 rows of tempered COUNTER CUTTERS
  • Protection with chains
  • Support roller, adjustable in height, reinforced bearings and roller
  • Colors: charcoal RAL7021| red RAL3020
OPTIONS
  • PTO drive shaft
  • Gearbox 1000 rpm with automatic inverter and double freewheel for reversible tractors
  • Front rakes
  • Rubber gauge wheels

And other options of choice.

S420
S420
HELIX
HELIX
2CC
2CC
BIONIC FEED
BIONIC FEED

 
8880 Bekett Road
West Chester, OH 45011
T +1 513-443-6339