H-SMO-B
Mulching mower - attachment for excavator 150-250 bar | 40-140 l/min [2175-3626 psi | 10.5-37 gpm]
- Mulching mower for excavators from 5 to 13 t.
- Mulching of grass and brush up to 7 cm [3”] Ø
The model H-SMO-B is a strong and versatile SEPPI flail mulcher for mowing and maintaining wasteland and areas difficult to access. This hydraulic attachment is trong and universal mower to be mounted on tyre or tracked excavators for maintaining
overgrown areas and slopes, land clearing, right of way management and green spece maintenance.
SEPPI H-SMO-B mulching head is prepared for an individual interface plate for excavators of different brands. The rear hood allows the adjustment of the degree of mulching. With the stong support roller it is possible to adapt to the contours of the ground and to adjust the height of cut. Mechanical float adaptor follows the contours of the ground.
Available working width: 125, 150, 200 [49", 59", 79"].
H-SMO-B STANDARD VERSION
- Mulches grass & brush up to 7 cm [3”] Ø
- For excavators from 5 to 13 t [11-28k lbs]
- Chassis made of high tensile steel S420
- LOW PROFILE
- Universal attachment interface
- Belt transmission (4)
- Prepared for transmission with hydraulic motor of choice
- Mechanically adjustable rear hood
- Front protection with chains
- Rear protection: safety rubber flap
- Support roller 152 mm Ø [6”], adjustable in height, reinforced bearings and roller
- Triple helical rotor with SMO flails
- 2 rows of tempered COUNTER CUTTERS
- Colors: charcoal RAL7021| red RAL3020
OPTIONS
- Rotor with Y DUO flails
- Variable displacement motor with relief valve, different types at choice
- Attachment - interface plate for excavators of different brands
- Mechanical float adaptor
- Interface plate with 190° rotation
And other options of choice.
![The SEPPI mulching head BMS comes with a forestry rotor able to mulch vegetation up to 30 cm [12"] in diameter](https://static.seppi.com/images/trinciatrici_mulcher_broyer_shredder/index_m/bms.JPG)
![The SEPPI mulching head E20 direct Forestry mulcher for excavator 12 - 21 t 200-350 bar | 130-200l/min [3000-5075 psi | 34-53 gpm] Mulching head with DIRECT TRANSMISSION for continuous use - never change belts again!](https://static.seppi.com/images/trinciatrici_mulcher_broyer_shredder/index_m/E20_direct_150_Rev01.jpg)
