Forestry Pick-Up Mulcher MINIFORST dt pick-up for compact loaders | SEPPI M.

MINIFORST dt pick-up

Forestry Pick-Up Mulcher for 120-240 HP

  • Strong pick-up mulcher with double transmission dt for cultivations with very thick and bulky wood
  • Mulches wood up to 20 cm [8”] Ø and occasionally larger diameters
  • RIC - Radial Interference Cut rotor with carbide-tip-hammers
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung
Mulchgerät mit Pick-up-Vorrichtung

Certain crops produce very high quantities of prunings. This can cause big problems when it is time to mulch them. Burning is often illegal and is always bad for the environment. The SEPPI Miniforst dt pick-up Mulcher provides a perfect solution – picking up the prunings with a pick-up reel at ground level and, if needed, reinforcing the feed into the machine with an optional top reel. This results in a fast biodegradation, just one cultivation cycle.

The SEPPI MINIFORST dt pick-up mulcher is particularly suitable for olive, citrus, walnut and almond cultivations and stony conditions
- fast working
- collecting and fine mulching - MINIFORST dt pick-up mulches finely 100% of the prunings in one single pass
- different tools of choice - long fixed hammers lifetime
- prunings are lifted from the ground and processed through a screen; therefore no contact between the hammers and stones.

SEPPI MINIFORST dt pick up casing is very resistent, made of high-tensile steel. 4 rows of replaceable tempered COUNTER CUTTERS inside the casing will give a perfect result when mulching.

Standard is the mulcher equiped with both pick-up rotors: 

Upper pick-up kit consisting of rotor BIONIX FEED on the hydraulic hood, motor and hydraulilc system with flow control. The pick-up rotor is driven by tractor hydraulics.

Lower pick-up kit consisting of frame with lower pick-up rotor BIONIC FEED, support skids, motor and hydraulic system with flow divider and perssure gauge for easy control of the pik-up rotors.

The mulching rotor RIC (Radial Interference Cut) is a SEPPI patented helical rotor with SUPER MONO TIP hammers with tungsten carbide tip. This type of rotor is very agresive and resistent.

Available working width: 225 cm [ 89"].

 

MOST COMMON AREAS OF USE
  • Citrus cultivations
  • Olive plantations
  • Almond and walnut cultivations
MINIFORST dt pick-up - STANDARD VERSION
  • Mulches wood up to 20 cm [8”] Ø and occasionally larger diameters
  • RIC- Radial Interference Cut rotor with SUPER MONO TIP hammers with tungsten carbide tip
  • 4 rows of replaceable tempered counter cutters
  • Working speed 0-7 km/h
  • ISO 3-point rear linkage central fixed cat. 2 (for pushed machines only)
  • 1000 rpm gearbox with freewheel and through shaft
  • Input shaft 1 3/8” Z=6
  • Double transmission dt with 2x 5 belts
  • Hydraulic hood with pick-up rotor BIONIC FEED, includes motor and hydraulic system with flow control
  • Pick-up Rotor driven by tractor hydraulics; Required hydraulic flow: 20 l/min [5,3 gpm]
  • Rubber gauge wheels, adjustable in height
  • Colors: red RAL3020 & charcoal RAL7021
OPTIONS
  • PTO drive shaft

AR400
AR400
no desc
no desc
HELIX
HELIX
CARBIDE
CARBIDE
RIC
RIC
BIONIC FEED
BIONIC FEED
BOLTED SHAFT
BOLTED SHAFT

 
8880 Bekett Road
West Chester, OH 45011
T +1 513-443-6339