STAR-FC hyd - stump grinder for excavators up 15 to 35 t | SEPPI M.

STAR-FC hyd

Stump grinder for excavators up 15 to 35 t 150-350 bar | 120-320 l/min [2175-5076 psi |31.7-84.5 gpm]

  • Grinds and mulches wood up to 40 cm Ø
  • Crushes stones up to 15 cm Ø
  • Tills as deep as 30 cm below the surface!
stump grinder
Tills the soil in depth
Tills the soil in depth
Tills the soil in depth
Tills the soil in depth
Tills the soil in depth
Tills the soil in depth
Frantuma sassi fino a 15 cm Ø
Tills as deep as 30 cm below the surface
дробление камней до 15 Ø

The stump grinders made by SEPPI M. are strong and efficient machines. Wood and other vegetation will be tilled, ground finely and incorporated into the soil, where it will quickly decompose. The soil will be ready to plant or for other uses.

 Typical use of SEPPI stump grinders:

· in agriculture and forestry they will grind and mulch stumps and roots of felled material and till the soil
· in greenspace maintenance they will remove stumps from parks and road sides
· in construction and energy they will eliminate stumps and roots from construction sites

The SEPPI STAR-FC hyd is a multi-purpose stump grinder and soil tiller for excavators from 15-35 tons [30,000-70,000 lb].
It is ideal to grind stumps and roots, but also to crush stones, even at depth.

With the aggressive patented rotor of new generation V-LOCK with efficient hammer combination of the new type, ULTRA MONO PROTECT + MONO & ULTRA MONO EXTREME with additional tungsten carbide tips STAR-FC hyd mulches wood up to 40 cm in diameter and crushes stones up to 15 cm, and tills as deep as 30 cm below the surface. Very strong frame, for a very long life made of wearresistant steel with tempered counter knives for a perfect mulching result. CARBONCHAIN gear belts provide high strength and length stability with high flexibility.  STAR-FC hyd has a very strong chassis S420 with replacable plates AR400 for a very long life.

ISOBUS system (temperature, cooling, hour counter) - with ISOBUS terminal

The multi-functionality is one of most important features of SEPPI M. machines.

Available working width: 75, 100, 125 [30", 39", 49"].

 

APPLICATIONS
  • Grinds stumps and crush stones on roads, farms and other areas;
  • Tills the soil in depth
  • Prepare soil for (re)planting;
  • For forests, greenspace and steep slopes.

and much more....

 

STAR-FC hyd - STANDARD VERSION:
  • Grinds & mulches wood up to 40 cm [16”]Ø
  • Crushes stones up to 15 cm [6”] Ø
  • Tills as deep as 30 cm [12”] below the surface
  • Rotor V-LOCK: combination of tungsten carbide tips hammers ULTRA MONO PROTECT + MONO & ULTRA MONO EXTREME
  • Anti-wear hammer support
  • Bolt-on-rotor shaft
  • For excavators from 15-35 tons [30,000-70,000 lb]
  • CARBONCHAIN Gear belt drive (model 125: available single or double)
  • Prepared for optional M-BOOST motor/s
  • ISOBUS system (temperature, cooling, hour counter) - with ISOBUS terminal
  • Prepared for an individual interface plate
  • Chassis made of high tensile steel S420 with internal replaceable WEAR PLATES
  • 2 rows of tempered COUNTER CUTTERS
  • Protection: double chains
  • Narrow in-depth skids, reinforced
  • Colors: red RAL3020 & charcoal RAL7021
OPTIONS
  • Automatic variable displacement Motor M-BOOST with adjustable speed, electonically driven, cable & controls incl.
  • Individual interface plate for excavator arm (for different excavator brands)
  • 190° hydraulic rotation plate

And other options of choice.

ISOBUS
ISOBUS
S420
S420
WEAR PLATE
WEAR PLATE
CARBONCHAIN
CARBONCHAIN
BOLTED SHAFT
BOLTED SHAFT
V-LOCK
V-LOCK
CARBIDE
CARBIDE

 
Via Trento, 111
Mezzolombardo
T 0461 178 75 00
F 0471 962 547