WBS pick-up

mulcher with pick-up device 90-180 HP

  • Strong flail mulcher with pick-up rotor and mulching grid. For prunings in almond, citrus and olive plantations. The result is a very fine mulch that will easily decompose.
  • Mulches grass and prunings up to 11 cm [4.3”] Ø
  • Pick-up kit for material feed with grid inclusive rotor

SEPPI M. pick-up mulchers mulch finely, through a fine mulching grid. This results in a fast biodegradation, within one season.
The WBS pick-up is a heavy mulcher for bushes and very strong prunings, suitable for olive, walnut and almond cultivations, orchards and vineyards and stony conditions. The machine is fast, it collects and mulches finely 100% of the prunings in one single pass.
The Prunings are lifted from the ground and processed through a screen; therefore no contact between the hammers and ground. The prunings are then processed within a screen to produce a fine and uniform mulch.

WBS pick up casing is very resistent, made of high-tensile steel. Standart is the mulcher equiped with the Pick-up kit for material feed with grid inclusive rotor. The rotor with tungsten carbide fixed hammers is very agresive and resistent. WBS pick up mulchs grass, brush and wood
up to 11 cm [4,7”] in diameter. An additional fine mulching screen is available as an option.

Rubber gauge wheels protect the roller on uneven and stony ground and if there are stones.

Available working width: 175, 200, 225, 250 cm [ 69", 79", 89", 98"].

Very strong flail mulcher with pick-up system for a very fine mulch in orchards: The WBS pick-up is a heavy mulcher for bushes and very strong prunings. The pick-up system collects piled up prunings from the soil and produces a very fine mulch that will quickly decompose.

 

MOST COMMON AREAS OF USE
  • Citrus cultivations
  • Olive plantations
  • Almond and walnut cultivations
STANDARD VERSION
  • Mulches grass and prunings up to 11 cm [4.3”] Ø
  • Working speed 1–3 km/h
  • Double pick-up rotor
  • Standard tools: tungsten carbide fixed hammers
  • Gearbox 1000 rpm
  • Input shaft 1 3/8” Z=6
  • 5 belts
  • 2 independent hydraulic circuits for pick-up rotors
  • Anti-wear mulching grid
  • Rear hood with manual opening
  • 4 support wheels for road transport, with hydraulical adjustment
  • Rear protection: rubber flap
  • Rotation sense inversion
  • Remote control
  • Speed control
  • Colour: red RAL 3020
OPTIONS
  • PTO drive shaft with freewheel & wide angle
  • PTO drive shaft with torque limiter
  • 540 rpm gearbox
  • Fine mulching screen for almond prunings
  • Draw bar with side shift

And other options of choice.

 
Zona Artigianale, 1
Caldaro
T 0471 963 550
F 0471 962 547

This website uses cookies. By continuing to use the website, you consent to the use of cookies.